Manrose CFD200TN In-Line Centrifugal Timer Fan 100mm Duct With Brackets

Manrose CFD200TN In-Line Centrifugal Timer Fan 100mm Duct With Brackets

Still one of the UK’s most popular inline fans the Manrose CFD200TN can be used in a wide range of domestic, commercial and industrial applications. It uses backward curved centrifugal impellers for a large airflow against the high pressures caused by longer lengths of ducting and resistance by grilles. The CFD200TN has an extract rate of 110m3/hr or 31 litres per second and generating 120Pa air pressure may be installed with up to 10m of ducting without significant loss of power.

Suitable for Wide Range of Applications in Domestic Environments, the CFD200TN has been designed to ensure compliance with Building Regulations on Ventilation (F1) across a wide range of applications including bathrooms, toilets, en-suites and utility rooms within domestic environments.

Designed for Use With Suspended Ceilings, the CFD200TN comes complete with mounting bracket for safe and secure installation

Fitted with an overrun timer which can be set to run for anywhere between 1 and 20 minutes, The CFD200TN will continue to run for the pre-set amount of time once it has been turned off at the switch. This ensures that excess moisture is cleared from the air, preventing mould and condensation once the occupier has left the room.

Powerful, Quiet, Unobtrusive it provides extract rates of up to 110m³/hr and a fan speed of 1400RPM, CFD200TN is a powerful in-line fan that operates at just 45dB(A), about the same noise level as light rainfall

Ideal for Longer Duct Runs it’s fitted with centrifugal backward curved impellers, the CFD200TN enables large volumes of airflow even against high pressures caused by longer duct runs. A spring operated backdraught shutter prevents unwanted draughts from entering the property.

A single phase induction motor benefits from pre-oiled bearings ensuring a long, maintenance free life whilst the outer casing is made from high strength ABS thermoplastics for durability and easy cleaning.

Features 

• Supplied with mounting bracket
• Manufactured using high impact ABS Thermoplastic for strength and durability
• Designed to comply with the 2006 Building Regulations on Ventilation (F1).
• A spring operated Non return flap built in to the discharge spigot to prevent Back Draughts