Aico EI1529RC Hard Wired Alarm Control Switch
AICO – Ei1529RC Hard Wired Alarm Control Switch
Product Description
The Ei1529RC is used to control all the alarms in a system from one place. We highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as its essential that you can tell which alarm has sounded. From then you can identify which danger is present and the action you should take.
This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user to remotely Test, Locate and Silence alarms in the system:
- Test The alarm system
- Locate The alarm that has been activated
- Silence Any nuisance alarms
Technical Information
- Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive).
- Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives.
- Wall mounted for ease of use can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied).
- Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms.
- The unit incorporates 3 switches marked Locate, Test and Hush. These provide control features as detailed below and a mains check function as detailed below.
- Locate When the system is in an alarm state, pressing and releasing the Locate switch will silence all alarms in the system except for the alarm that initiated the alarm state. This feature allows easy identification of either the source of a nuisance alarm, or the site of a real fire. Note: Pressing the Locate switch temporarily disables the interconnect line between the alarms, it does not disable the individual alarms in the system. Each alarm is still fully functional as a stand-alone unit until the system automatically resets within 10 minutes of operation. The system can be manually reset at any time by pressing the Test switch until all the alarms sound.
- Test Pressing the Test switch into the on position will test all the alarms in the system. This operation is equivalent to pressing the Test button on all alarms in the system simultaneously and as such performs a true functional test of the system without having to reach up to each alarm in turn. Pressing the Test switch overrides the Location function and resets the system to standby.
- Hush Momentarily pressing the Hush button switch allows remote silencing of false alarms. The system will reset automatically after approximately 10 minutes. In the unlikely event that a fire should occur during the Hush period the feature will be overridden when sufficient smoke has entered the sensor chamber of the smoke alarms in the system, or sufficient CO has entered the sensor of the CO alarms in the system. Note: The Hush feature will not operate if the CO alarm is sensing CO levels of 300ppm or above due to the increased danger.
- Main Check Provides warning of mains failure, as the Test feature will not operate in the absence of mains power.
- Easily installed via a 3 wire connection of live, Neutral and Interconnect/Control (as standard smoke/heat alarm wiring).
- Dimensions: 90mm x 90mm x 40mm deep.
- Weight inclusive of packaging: 240g.
- Manufactured in Ireland.
£30.78
Shipping
DPD Premium Delivery 1-2 Working Days £5.99
Additional information
| Product | Control Switch |
|---|---|
| Type | Alarm |
| Power Supply Mains | 230 V |
| Wiring Method | Wired |
| Voltage Type | AC |
| Number of Wires | 3 |
| c/w Batteries | N |
| Mounting | Wall |
| Material | High Impact Polystyrene |
| Colour | White |
| Length | 90 mm |
| Width | 90 mm |
| Depth | 50 mm |
| Minimum Operating Humidity | 15 % |
| Maximum Operating Humidity | 95 % |
| CE Approved | Y |
| Standards | EN 60065:2014 EN 61000-6-1:2007 EN 61000-6-2:2005 |
| Warranty | 5 Years |
| Unit Weight | 0.191 kg |
| EAN | 5099383004274 |
| GTIN | 5099383004274 |
| MPN | EI1529RC |
| Brand | Aico |
