Vent Axia 443319L Sentinel Kinetic BH Heat Recovery Unit – Humidistat & Bypass Left Hand Flow

Vent Axia 443319L Sentinel Kinetic BH Heat Recovery Unit – Humidistat & Bypass Left Hand Flow

Easy Installation

The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting
can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard 290mm.
For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options

The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made
outside the unit and can be completed after installation.

Integral Humidity Sensor

The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Recognised in SAP PCDB
Lightweight for easier installation
Horizontal duct option for space-saving installations
Fits within a 290mm deep kitchen cupboard
Integrated digital controller for simple and accurate commissioning
Plug and play controls; Humidistat, Wireless Remote
BMS connectivity
LS inputs (Light Switch)
Horizontal duct options
Acoustic Enclosure option for reduced breakout noise
Acoustic Top Box option for reduced in-duct noise